Lian Li Modular Cube Case Review

Hard Drive Bays

This device is installed at the rear of the case using one of the 120mm fan mounts. It provides 3 x 3.5” bays with anti-vibration rubber already installed so to reduce noise. So if you need the extra drives then its good option.

This accessory offers 3 x 3.5” drive bays, it has a front panel with the Lian Li logo and with an 80mm fan to cool the devices (including a dust filter).

There’s also the bigger version, which provides 4 x 3.5” drive bays and a 120mm fan to cool the devices. I think this would be better option because it allows you to install one extra drive compared to the above option. So you could have 4 x 3 = 12 hard drives on one side of the case if you want.

This is my favourite one, since it contains no Lian Li logo (I think one is enough on the case). I love the plain look, so basically it’s the same as the above item.

This one can be used on its own, it would be cheaper option as you could fit a fan and hold the HDD’s using 5.25″ to 3.5″ converters. It can also be used the radiator mount.

Removable plate accessories

Installing these devices is simple, unscrew and screw back on, no need to cut holes etc it’s the ready made solution for most modders if not all.

The bellow device offers 2 x 120mm mount holes. This will help in exhausting hot air from both sides of the case.

This is simply a window, if you prefer to have lights etc to show off the case.

This one allows you to install a radiator for water cooling. You can see the mounting holes provided to install such a device.

Page 3 of 4